模板列表
持续收录中。新模板推送到 GitHub 仓库后，这里会陆续补上。
M6 螺纹孔
在零件上自动创建 M6 × 1.0 螺纹孔的完整流程：建块、草图定位、孔特征（含孔口倒角与底部钻尖）。
建模效果：零件中的 M6 螺纹孔剖面
// Designcenter 2512
// Journal created by yuhua on Wed Oct 21 20:01:04 2026 中国标准时间
//
using System;
using NXOpen;
public class NXJournal
{
public static void Main(string[] args)
{
NXOpen.Session theSession = NXOpen.Session.GetSession();
NXOpen.Part workPart = theSession.Parts.Work;
NXOpen.Part displayPart = theSession.Parts.Display;
NXOpen.Session.UndoMarkId markId1;
markId1 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Sketch");
theSession.BeginTaskEnvironment();
NXOpen.Session.UndoMarkId markId2;
markId2 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "起点");
NXOpen.Sketch nullNXOpen_Sketch = null;
NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
sketchInPlaceBuilder1 = workPart.Sketches.CreateSketchInPlaceBuilder2(nullNXOpen_Sketch);
NXOpen.Point3d origin1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Vector3d normal1 = new NXOpen.Vector3d(0.0, 0.0, 1.0);
NXOpen.Plane plane1;
plane1 = workPart.Planes.CreatePlane(origin1, normal1, NXOpen.SmartObject.UpdateOption.WithinModeling);
sketchInPlaceBuilder1.PlaneReference = plane1;
NXOpen.Unit unit1 = ((NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter"));
NXOpen.Expression expression1;
expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Expression expression2;
expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);
NXOpen.SimpleSketchInPlaceBuilder simpleSketchInPlaceBuilder1;
simpleSketchInPlaceBuilder1 = workPart.Sketches.CreateSimpleSketchInPlaceBuilder();
sketchAlongPathBuilder1.PlaneLocation.Expression.SetFormula("0");
theSession.SetUndoMarkName(markId2, "创建草图 对话框");
simpleSketchInPlaceBuilder1.UseWorkPartOrigin = false;
NXOpen.Scalar scalar1;
scalar1 = workPart.Scalars.CreateScalar(0.0, NXOpen.Scalar.DimensionalityType.None, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Features.Block block1 = ((NXOpen.Features.Block)workPart.Features.FindObject("BLOCK(1)"));
NXOpen.Edge edge1 = ((NXOpen.Edge)block1.FindObject("EDGE * 2 * 5 {(30,0,0)(60,0,0)(90,0,0) BLOCK(1)}"));
NXOpen.Point point1;
point1 = workPart.Points.CreatePoint(edge1, scalar1, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Direction direction1;
direction1 = workPart.Directions.CreateDirection(edge1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Face face1 = ((NXOpen.Face)block1.FindObject("FACE 5 {(60,20,0) BLOCK(1)}"));
NXOpen.Xform xform1;
xform1 = workPart.Xforms.CreateXformByPlaneXDirPoint(face1, direction1, point1, NXOpen.SmartObject.UpdateOption.WithinModeling, 0.625, false, false);
NXOpen.CartesianCoordinateSystem cartesianCoordinateSystem1;
cartesianCoordinateSystem1 = workPart.CoordinateSystems.CreateCoordinateSystem(xform1, NXOpen.SmartObject.UpdateOption.WithinModeling);
simpleSketchInPlaceBuilder1.CoordinateSystem = cartesianCoordinateSystem1;
simpleSketchInPlaceBuilder1.HorizontalReference.Value = edge1;
NXOpen.Point point2;
point2 = simpleSketchInPlaceBuilder1.SketchOrigin;
simpleSketchInPlaceBuilder1.SketchOrigin = point2;
NXOpen.Scalar scalar2;
scalar2 = workPart.Scalars.CreateScalar(0.0, NXOpen.Scalar.DimensionalityType.None, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Point nullNXOpen_Point = null;
NXOpen.Point point3;
point3 = workPart.Points.CreatePoint(edge1, scalar2, NXOpen.PointCollection.PointOnCurveLocationOption.PercentParameter, nullNXOpen_Point, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Expression expression3;
expression3 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Scalar scalar3;
scalar3 = workPart.Scalars.CreateScalar(0.0, NXOpen.Scalar.DimensionalityType.None, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Point point4;
point4 = workPart.Points.CreatePoint(edge1, scalar3, NXOpen.PointCollection.PointOnCurveLocationOption.PercentParameter, nullNXOpen_Point, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Session.UndoMarkId markId3;
markId3 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "起点");
NXOpen.Expression expression4;
expression4 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
string newsystemname1;
newsystemname1 = workPart.Expressions.CreateSystemName("", "_x");
NXOpen.Expression expression5;
expression5 = workPart.Expressions.CreateSystemExpressionWithUnits("p128_x=30.00000000000", unit1);
string newsystemname2;
newsystemname2 = workPart.Expressions.CreateSystemName("", "_y");
NXOpen.Expression expression6;
expression6 = workPart.Expressions.CreateSystemExpressionWithUnits("p129_y=0.00000000000", unit1);
string newsystemname3;
newsystemname3 = workPart.Expressions.CreateSystemName("", "_z");
NXOpen.Expression expression7;
expression7 = workPart.Expressions.CreateSystemExpressionWithUnits("p130_z=0.00000000000", unit1);
string newsystemname4;
newsystemname4 = workPart.Expressions.CreateSystemName("", "_xdelta");
NXOpen.Expression expression8;
expression8 = workPart.Expressions.CreateSystemExpressionWithUnits("p131_xdelta=0", unit1);
string newsystemname5;
newsystemname5 = workPart.Expressions.CreateSystemName("", "_ydelta");
NXOpen.Expression expression9;
expression9 = workPart.Expressions.CreateSystemExpressionWithUnits("p132_ydelta=0", unit1);
string newsystemname6;
newsystemname6 = workPart.Expressions.CreateSystemName("", "_zdelta");
NXOpen.Expression expression10;
expression10 = workPart.Expressions.CreateSystemExpressionWithUnits("p133_zdelta=0", unit1);
string newsystemname7;
newsystemname7 = workPart.Expressions.CreateSystemName("", "_radius");
NXOpen.Expression expression11;
expression11 = workPart.Expressions.CreateSystemExpressionWithUnits("p134_radius=0", unit1);
string newsystemname8;
newsystemname8 = workPart.Expressions.CreateSystemName("", "_angle");
NXOpen.Unit unit2 = ((NXOpen.Unit)workPart.UnitCollection.FindObject("Degrees"));
NXOpen.Expression expression12;
expression12 = workPart.Expressions.CreateSystemExpressionWithUnits("p135_angle=0", unit2);
string newsystemname9;
newsystemname9 = workPart.Expressions.CreateSystemName("", "_zdelta");
NXOpen.Expression expression13;
expression13 = workPart.Expressions.CreateSystemExpressionWithUnits("p136_zdelta=0", unit1);
string newsystemname10;
newsystemname10 = workPart.Expressions.CreateSystemName("", "_radius");
NXOpen.Expression expression14;
expression14 = workPart.Expressions.CreateSystemExpressionWithUnits("p137_radius=0", unit1);
string newsystemname11;
newsystemname11 = workPart.Expressions.CreateSystemName("", "_angle1");
NXOpen.Expression expression15;
expression15 = workPart.Expressions.CreateSystemExpressionWithUnits("p138_angle1=0", unit2);
string newsystemname12;
newsystemname12 = workPart.Expressions.CreateSystemName("", "_angle2");
NXOpen.Expression expression16;
expression16 = workPart.Expressions.CreateSystemExpressionWithUnits("p139_angle2=0", unit2);
string newsystemname13;
newsystemname13 = workPart.Expressions.CreateSystemName("", "_distance");
NXOpen.Expression expression17;
expression17 = workPart.Expressions.CreateSystemExpressionWithUnits("p140_distance=0", unit1);
string newsystemname14;
newsystemname14 = workPart.Expressions.CreateSystemName("", "_arclen");
NXOpen.Expression expression18;
expression18 = workPart.Expressions.CreateSystemExpressionWithUnits("p141_arclen=0", unit1);
string newsystemname15;
newsystemname15 = workPart.Expressions.CreateSystemName("", "_percent");
NXOpen.Unit nullNXOpen_Unit = null;
NXOpen.Expression expression19;
expression19 = workPart.Expressions.CreateSystemExpressionWithUnits("p142_percent=0", nullNXOpen_Unit);
theSession.SetUndoMarkName(markId3, "点 对话框");
expression5.SetFormula("30");
expression6.SetFormula("0");
expression7.SetFormula("0");
expression5.SetFormula("30.00000000000");
expression6.SetFormula("0.00000000000");
expression7.SetFormula("0.00000000000");
int nErrs1;
nErrs1 = theSession.UpdateManager.AddToDeleteList(point4);
NXOpen.Expression expression20;
expression20 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Edge edge2 = ((NXOpen.Edge)block1.FindObject("EDGE * 3 * 5 {(30,40,0)(30,20,0)(30,0,0) BLOCK(1)}"));
NXOpen.Point point5;
point5 = workPart.Points.CreateCurveMidPoint(edge2, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Point point6;
point6 = workPart.Points.CreateCurveMidPoint(edge2, NXOpen.SmartObject.UpdateOption.WithinModeling);
point6.RemoveViewDependency();
point6.RemoveViewDependency();
NXOpen.Expression expression21;
expression21 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Edge edge3 = ((NXOpen.Edge)block1.FindObject("EDGE * 5 * 6 {(90,0,0)(90,20,0)(90,40,0) BLOCK(1)}"));
NXOpen.Point point7;
point7 = workPart.Points.CreateCurveMidPoint(edge3, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Point point8;
point8 = workPart.Points.CreateCurveMidPoint(edge3, NXOpen.SmartObject.UpdateOption.WithinModeling);
point8.RemoveViewDependency();
point8.RemoveViewDependency();
NXOpen.Expression expression22;
expression22 = workPart.Expressions.CreateSystemExpressionWithUnits("50", nullNXOpen_Unit);
expression22.RightHandSide = "0.50000000000";
NXOpen.Scalar scalar4;
scalar4 = workPart.Scalars.CreateScalarExpression(expression22, NXOpen.Scalar.DimensionalityType.None, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Point point9;
point9 = workPart.Points.CreatePoint(point6, point8, scalar4, NXOpen.SmartObject.UpdateOption.WithinModeling);
expression5.SetFormula("60");
expression6.SetFormula("20");
expression7.SetFormula("0");
expression5.SetFormula("60.00000000000");
expression6.SetFormula("20.00000000000");
expression7.SetFormula("0.00000000000");
NXOpen.Session.UndoMarkId markId4;
markId4 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "点");
theSession.DeleteUndoMark(markId4, null);
NXOpen.Session.UndoMarkId markId5;
markId5 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "点");
workPart.Points.DeletePoint(point5);
workPart.Points.DeletePoint(point7);
theSession.DeleteUndoMark(markId5, null);
theSession.SetUndoMarkName(markId3, "点");
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression5);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression6);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression7);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression8);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression9);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression10);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression11);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression12);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression13);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression14);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression15);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression16);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression17);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression18);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression19);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
workPart.MeasureManager.SetPartTransientModification();
workPart.Expressions.Delete(expression4);
workPart.MeasureManager.ClearPartTransientModification();
workPart.MeasureManager.SetPartTransientModification();
workPart.Expressions.Delete(expression20);
workPart.MeasureManager.ClearPartTransientModification();
workPart.MeasureManager.SetPartTransientModification();
workPart.Expressions.Delete(expression21);
workPart.MeasureManager.ClearPartTransientModification();
theSession.DeleteUndoMark(markId3, null);
workPart.Points.DeletePoint(point3);
simpleSketchInPlaceBuilder1.SketchOrigin = point9;
workPart.Points.DeletePoint(point2);
NXOpen.Point point10;
point10 = workPart.Points.CreatePoint(point6, point8, scalar4, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Session.UndoMarkId markId6;
markId6 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "创建草图");
theSession.DeleteUndoMark(markId6, null);
NXOpen.Session.UndoMarkId markId7;
markId7 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "创建草图");
theSession.Preferences.Sketch.CreateInferredConstraints = false;
theSession.Preferences.Sketch.ContinuousAutoDimensioning = false;
theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;
theSession.Preferences.Sketch.TextSizeFixed = false;
theSession.Preferences.Sketch.FixedTextSize = 3.0;
theSession.Preferences.Sketch.DisplayParenthesesOnReferenceDimensions = true;
theSession.Preferences.Sketch.DisplayReferenceGeometry = false;
theSession.Preferences.Sketch.DisplayShadedRegions = true;
theSession.Preferences.Sketch.FindMovableObjects = true;
theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;
theSession.Preferences.Sketch.DisplayObjectColor = false;
theSession.Preferences.Sketch.DisplayObjectName = true;
theSession.Preferences.Sketch.EditDimensionOnCreation = true;
theSession.Preferences.Sketch.CreateDimensionForTypedValues = true;
theSession.Preferences.Sketch.AddRemoteFindingAfterSnap = true;
NXOpen.NXObject nXObject1;
nXObject1 = simpleSketchInPlaceBuilder1.Commit();
NXOpen.Sketch sketch1 = ((NXOpen.Sketch)nXObject1);
NXOpen.Features.Feature feature1;
feature1 = sketch1.Feature;
NXOpen.Session.UndoMarkId markId8;
markId8 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "update");
int nErrs2;
nErrs2 = theSession.UpdateManager.DoUpdate(markId8);
sketch1.Activate(NXOpen.Sketch.ViewReorient.True);
theSession.Preferences.Sketch.FindMovableObjects = true;
NXOpen.SketchFindMovableObjectsBuilder sketchFindMovableObjectsBuilder1;
sketchFindMovableObjectsBuilder1 = workPart.Sketches.CreateFindMovableObjectsBuilder();
NXOpen.NXObject nXObject2;
nXObject2 = sketchFindMovableObjectsBuilder1.Commit();
sketchFindMovableObjectsBuilder1.Destroy();
NXOpen.SketchFindIssuesBuilder sketchFindIssuesBuilder1;
sketchFindIssuesBuilder1 = workPart.Sketches.CreateFindIssuesBuilder();
sketchFindIssuesBuilder1.ZoomScale = 1.5179205639769686;
NXOpen.NXObject nXObject3;
nXObject3 = sketchFindIssuesBuilder1.Commit();
sketchFindIssuesBuilder1.Destroy();
workPart.ModelingViews.WorkView.SetScale(1.5179205639769686);
theSession.ActiveSketch.Preferences.DisplayReferenceGeometry = true;
theSession.DeleteUndoMark(markId7, null);
theSession.SetUndoMarkName(markId2, "创建草图");
sketchInPlaceBuilder1.Destroy();
sketchAlongPathBuilder1.Destroy();
simpleSketchInPlaceBuilder1.Destroy();
workPart.Points.DeletePoint(point10);
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression2);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
workPart.MeasureManager.SetPartTransientModification();
workPart.Expressions.Delete(expression3);
workPart.MeasureManager.ClearPartTransientModification();
try
{
// 表达式仍然在使用中。
workPart.Expressions.Delete(expression1);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
plane1.DestroyPlane();
theSession.DeleteUndoMarksUpToMark(markId2, null, true);
NXOpen.Session.UndoMarkId markId9;
markId9 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Open Sketch");
theSession.ActiveSketch.SetName("SKETCH_000");
NXOpen.Session.UndoMarkId markId10;
markId10 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "起点");
theSession.SetUndoMarkName(markId10, "草图点 对话框");
NXOpen.Expression expression23;
expression23 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Point point11 = ((NXOpen.Point)theSession.ActiveSketch.FindObject("Origin"));
NXOpen.Xform nullNXOpen_Xform = null;
NXOpen.Point point12;
point12 = workPart.Points.CreatePoint(point11, nullNXOpen_Xform, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Session.UndoMarkId markId11;
markId11 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "草图点");
point12.RemoveParameters();
NXOpen.Point3d coordinates1 = new NXOpen.Point3d(60.0, 20.0, 0.0);
point12.SetCoordinates(coordinates1);
theSession.ActiveSketch.AddGeometry(point12, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.ActiveSketch.Update();
NXOpen.SketchFindMovableObjectsBuilder sketchFindMovableObjectsBuilder2;
sketchFindMovableObjectsBuilder2 = workPart.Sketches.CreateFindMovableObjectsBuilder();
NXOpen.NXObject nXObject4;
nXObject4 = sketchFindMovableObjectsBuilder2.Commit();
sketchFindMovableObjectsBuilder2.Destroy();
NXOpen.SketchFindIssuesBuilder sketchFindIssuesBuilder2;
sketchFindIssuesBuilder2 = workPart.Sketches.CreateFindIssuesBuilder();
sketchFindIssuesBuilder2.ZoomScale = 1.5179205639769686;
NXOpen.NXObject nXObject5;
nXObject5 = sketchFindIssuesBuilder2.Commit();
sketchFindIssuesBuilder2.Destroy();
theSession.DeleteUndoMark(markId11, null);
theSession.SetUndoMarkName(markId10, "草图点");
theSession.SetUndoMarkVisibility(markId10, null, NXOpen.Session.MarkVisibility.Visible);
workPart.MeasureManager.SetPartTransientModification();
workPart.Expressions.Delete(expression23);
workPart.MeasureManager.ClearPartTransientModification();
NXOpen.Session.UndoMarkId markId12;
markId12 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Start");
theSession.SetUndoMarkName(markId12, "草图点 对话框");
NXOpen.Expression expression24;
expression24 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Point point13;
point13 = workPart.Points.CreatePoint(point11, nullNXOpen_Xform, NXOpen.SmartObject.UpdateOption.WithinModeling);
NXOpen.Session.UndoMarkId markId13;
markId13 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "草图点");
point13.RemoveParameters();
NXOpen.Point3d coordinates2 = new NXOpen.Point3d(60.0, 20.0, 0.0);
point13.SetCoordinates(coordinates2);
theSession.ActiveSketch.AddGeometry(point13, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.ActiveSketch.Update();
NXOpen.SketchFindMovableObjectsBuilder sketchFindMovableObjectsBuilder3;
sketchFindMovableObjectsBuilder3 = workPart.Sketches.CreateFindMovableObjectsBuilder();
NXOpen.NXObject nXObject6;
nXObject6 = sketchFindMovableObjectsBuilder3.Commit();
sketchFindMovableObjectsBuilder3.Destroy();
NXOpen.SketchFindIssuesBuilder sketchFindIssuesBuilder3;
sketchFindIssuesBuilder3 = workPart.Sketches.CreateFindIssuesBuilder();
sketchFindIssuesBuilder3.ZoomScale = 1.5179205639769686;
NXOpen.NXObject nXObject7;
nXObject7 = sketchFindIssuesBuilder3.Commit();
sketchFindIssuesBuilder3.Destroy();
theSession.DeleteUndoMark(markId13, null);
theSession.SetUndoMarkName(markId12, "草图点");
theSession.SetUndoMarkVisibility(markId12, null, NXOpen.Session.MarkVisibility.Visible);
workPart.MeasureManager.SetPartTransientModification();
workPart.Expressions.Delete(expression24);
workPart.MeasureManager.ClearPartTransientModification();
NXOpen.Session.UndoMarkId markId14;
markId14 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Start");
theSession.SetUndoMarkName(markId14, "草图点 对话框");
NXOpen.Expression expression25;
expression25 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
theSession.SetUndoMarkName(markId14, "草图点");
workPart.MeasureManager.SetPartTransientModification();
workPart.Expressions.Delete(expression25);
workPart.MeasureManager.ClearPartTransientModification();
theSession.DeleteUndoMark(markId14, null);
theSession.ActiveSketch.CalculateStatus();
theSession.Preferences.Sketch.SectionView = false;
NXOpen.Session.UndoMarkId markId15;
markId15 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Deactivate Sketch");
theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.True, NXOpen.Sketch.UpdateLevel.SketchOnly);
theSession.DeleteUndoMarksSetInTaskEnvironment();
theSession.EndTaskEnvironment();
theSession.DeleteUndoMark(markId1, null);
NXOpen.Section section1 = ((NXOpen.Section)workPart.FindObject("ENTITY 113 2"));
section1.DistanceTolerance = 0.01;
section1.ChainingTolerance = 0.0094999999999999998;
NXOpen.Session.UndoMarkId markId16;
markId16 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, null);
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = ((NXOpen.Features.SketchFeature)feature1);
features1[0] = sketchFeature1;
NXOpen.DisplayableObject nullNXOpen_DisplayableObject = null;
NXOpen.FeaturePointsRule featurePointsRule1;
featurePointsRule1 = workPart.ScRuleFactory.CreateRuleFeaturePoints(features1, nullNXOpen_DisplayableObject);
section1.AllowSelfIntersection(true);
section1.AllowDegenerateCurves(false);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = featurePointsRule1;
NXOpen.NXObject nullNXOpen_NXObject = null;
NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
section1.AddToSection(rules1, nullNXOpen_NXObject, nullNXOpen_NXObject, nullNXOpen_NXObject, helpPoint1, NXOpen.Section.Mode.Create, false);
theSession.DeleteUndoMark(markId16, null);
NXOpen.NXObject[] refs1;
section1.EvaluateAndAskOutputEntities(out refs1);
// can not output code to find <JABL>: <UGS::BOOLEAN_data> &00007FF4EB2ADFF8 [63571]
NXOpen.GeometricUtilities.BooleanOperation nullNXOpen_GeometricUtilities_BooleanOperation = null;
NXOpen.ScCollector scCollector1;
scCollector1 = nullNXOpen_GeometricUtilities_BooleanOperation.GetTargetBodiesCollector();
NXOpen.SelectionIntentRule[] rules2 = new NXOpen.SelectionIntentRule[0];
scCollector1.ReplaceRules(rules2, false);
NXOpen.SelectionIntentRuleOptions selectionIntentRuleOptions1;
selectionIntentRuleOptions1 = workPart.ScRuleFactory.CreateRuleOptions();
selectionIntentRuleOptions1.SetSelectedFromInactive(false);
NXOpen.Body[] bodies1 = new NXOpen.Body[1];
NXOpen.Body body1 = ((NXOpen.Body)workPart.Bodies.FindObject("BLOCK(1)"));
bodies1[0] = body1;
NXOpen.BodyDumbRule bodyDumbRule1;
bodyDumbRule1 = workPart.ScRuleFactory.CreateRuleBodyDumb(bodies1, true, selectionIntentRuleOptions1);
selectionIntentRuleOptions1.Dispose();
NXOpen.SelectionIntentRule[] rules3 = new NXOpen.SelectionIntentRule[1];
rules3[0] = bodyDumbRule1;
scCollector1.ReplaceRules(rules3, false);
// can not output code to find <JABL>: <UGS::ModlFeatureJA::HolePackageBuilder> &00007FF4EB2AD1E0 [63562]
NXOpen.Features.HolePackageBuilder nullNXOpen_Features_HolePackageBuilder = null;
nullNXOpen_Features_HolePackageBuilder.SizeOfHole = NXOpen.Features.HolePackageBuilder.SizesOfHole.Custom;
// can not output code to find <JABL>: <UGS::ModlFeatureJA::HolePackageBuilder> &00007FF4EB2AD1E0 [63562]
nullNXOpen_Features_HolePackageBuilder.TypeOfHole = NXOpen.Features.HolePackageBuilder.TypesOfHole.ThreadedHole;
NXOpen.Expression expression26 = ((NXOpen.Expression)workPart.Expressions.FindObject("p53"));
expression26.SetFormula("5");
NXOpen.Expression expression27 = ((NXOpen.Expression)workPart.Expressions.FindObject("p86"));
expression27.SetFormula("3");
NXOpen.Expression expression28 = ((NXOpen.Expression)workPart.Expressions.FindObject("p83"));
expression28.SetFormula("6");
NXOpen.Expression expression29 = ((NXOpen.Expression)workPart.Expressions.FindObject("p91"));
expression29.SetFormula("0.4");
NXOpen.Expression expression30 = ((NXOpen.Expression)workPart.Expressions.FindObject("p93"));
expression30.SetFormula("6");
NXOpen.Expression expression31 = ((NXOpen.Expression)workPart.Expressions.FindObject("p99"));
expression31.SetFormula("6");
NXOpen.Expression expression32 = ((NXOpen.Expression)workPart.Expressions.FindObject("p81"));
expression32.SetFormula("12");
NXOpen.Expression expression33 = ((NXOpen.Expression)workPart.Expressions.FindObject("p54"));
expression33.SetFormula("9");
// can not output code to find <JABL>: <UGS::ModlFeatureJA::HolePackageBuilder> &00007FF4EB2AD1E0 [63562]
nullNXOpen_Features_HolePackageBuilder.ThreadSize = "M6 x 1.0";
expression32.SetFormula("12");
expression33.SetFormula("20");
expression32.SetFormula("20");
expression32.SetFormula("20");
NXOpen.Session.UndoMarkId markId17;
markId17 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "孔");
theSession.DeleteUndoMark(markId17, null);
NXOpen.Session.UndoMarkId markId18;
markId18 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "孔");
// can not output code to find <JABL>: <UGS::ModlFeatureJA::HolePackageBuilder> &00007FF4EB2AD1E0 [63562]
NXOpen.Features.FeatureBuilder nullNXOpen_Features_FeatureBuilder = null;
nullNXOpen_Features_FeatureBuilder.ParentFeatureInternal = true;
// can not output code to find <JABL>: <UGS::ModlUtilsJA::StartHoleData> &00007FF4EB2A9728 [63572]
NXOpen.GeometricUtilities.StartHoleData nullNXOpen_GeometricUtilities_StartHoleData = null;
nullNXOpen_GeometricUtilities_StartHoleData.ScrewType = "General Screw Clearance";
// can not output code to find <JABL>: <UGS::ModlUtilsJA::StartHoleData> &00007FF4EB2A9728 [63572]
nullNXOpen_GeometricUtilities_StartHoleData.ScrewSize = "M10";
// can not output code to find <JABL>: <UGS::ModlUtilsJA::StartHoleData> &00007FF4EB2A9728 [63572]
nullNXOpen_GeometricUtilities_StartHoleData.FitOption = "Normal (H13)";
// can not output code to find <JABL>: <UGS::ModlUtilsJA::MiddleHoleData> &00007FF4D8F7F0B8 [63822]
NXOpen.GeometricUtilities.MiddleHoleData nullNXOpen_GeometricUtilities_MiddleHoleData = null;
nullNXOpen_GeometricUtilities_MiddleHoleData.FitOption = "Normal (H13)";
// can not output code to find <JABL>: <UGS::ModlUtilsJA::EndHoleData> &00007FF4D8FA0430 [63848]
NXOpen.GeometricUtilities.EndHoleData nullNXOpen_GeometricUtilities_EndHoleData = null;
nullNXOpen_GeometricUtilities_EndHoleData.FitOption = "Normal (H13)";
// can not output code to find <JABL>: <UGS::ModlFeatureJA::HolePackageBuilder> &00007FF4EB2AD1E0 [63562]
NXOpen.Builder nullNXOpen_Builder = null;
NXOpen.NXObject nXObject8;
nXObject8 = nullNXOpen_Builder.Commit();
theSession.DeleteUndoMark(markId18, null);
theSession.SetUndoMarkName((NXOpen.Session.UndoMarkId)(250), "孔");
// can not output code to find <JABL>: <UGS::ModlFeatureJA::HolePackageBuilder> &00007FF4EB2AD1E0 [63562]
nullNXOpen_Builder.Destroy();
workPart.MeasureManager.SetPartTransientModification();
NXOpen.Expression expression34 = ((NXOpen.Expression)workPart.Expressions.FindObject("p122"));
workPart.Expressions.Delete(expression34);
workPart.MeasureManager.ClearPartTransientModification();
}
public static int GetUnloadOption(string dummy) { return (int)NXOpen.Session.LibraryUnloadOption.Immediately; }
}